Sessions 6 & 7 Checklist
Checklist for Sessions 6 & 7
Place “S” for satisfactory as the following tasks are completed:
- Approaches the vehicle with awareness
- Enters the vehicle and makes appropriate checks and adjustments
- Identifies controls
- Prepares to drive
- Follows steps to put vehicle in motion
- Controls speed
- Uses commentary driving
Backing straight
- Checks all areas around the vehicle prior to putting it in reverse and while backing
- Pivots foot to brake pedal and shifts to reverse
- Grasps steering wheel at 12 o’clock with left hand
- Looks through the back window and targets path of travel
- Uses accelerator and brake effectively for speed control
- Demonstrates effective steering technique
- Makes frequent quick checks to the front
- Stops with rear bumper 3-6 inches from a designated pavement line using reference points
- Stops the vehicle completely before turning back around to face the front of the car
Backing and turning
- Searches all areas prior to putting the vehicle in reverse and while backing
- Grasps steering wheel at 12 o’clock position with the right hand for a left turn
- Grasps steering wheel at 12 o’clock position with the left hand for a right turn
- Demonstrates effective one-hand and hand-to-hand steering techniques
- Searches path of travel through rear side windows
- Keeps speed slow using idle speed or slight acceleration
- Stops with rear bumper 3 feet from designated pavement line using reference points
- Stops at the rear tire pivot point prior to turning
- Makes frequent quick checks to the front and sides to determine lane position
- Steers in the correct direction gradually and straightens the direction of the car
- Looks to the rear and front and stops at designated pavement line
- Stops the vehicle completely before turning around
- Properly secures the vehicle