Sessions 1 & 2: Checklist
Checklist for Sessions 1 & 2
Area around the vehicle that the driver cannot see
- Measure the distance in front of the vehicle that the driver cannot see
- Measure the distance to the rear of the vehicle that the driver cannot see
- Measure the distance to the left side of the vehicle that the driver cannot see
- Measure the distance to the right side of the vehicle that the driver cannot see
Place “S” for satisfactory as the following tasks are completed:
Getting Ready to Drive
- Approaches the vehicle with awareness; checks tires, fluid leaks, etc.
- Locks doors and checks all occupants for safety belt use
- Adjusts head restraints, seat position, safety restraints, steering wheel position
- Adjusts mirrors to reduce blind spots
- Identifies vehicle controls (refer to owner’s manual for explanation)
Starting the Vehicle
- Checks the parking brake
- Selects proper starting gear
- Pivots heel and places foot securely on brake pedal
- Demonstrates proficient use of ignition device
- Demonstrates ability to select and use appropriate accessories
- Starts the vehicle and makes appropriate gear selection for movement
- Puts headlights on day and night to increase safety
Placing Vehicle in Motion
- Visually identifies open space and target before moving foot from brake to gas
- Communicates with passengers before moving foot from brake to gas
- Puts the vehicle in motion smoothly and uses commentary driving
Stopping Vehicle in Motion
- Searches ahead of the vehicle to determine deceleration or braking needs
- Uses controlled braking efficiently with heel of foot on floorboard
- Checks rear zone space prior to braking
- Applies adequate force at the beginning of the braking process
- Brings the vehicle to a smooth stop
- Eases off brake pressure during the last seconds of braking to reduce vehicle pitch
- Checks the rear zone space before, during, and after braking
Steering
- Uses a balanced 8 and 4 hand position on the steering wheel
- Uses the hand-over-hand and hand-to-hand steering methods effectively
- Turns head and visually checks what’s ahead prior to turning
- Visually checks the rear/side view mirrors and mirror blind areas
Securing the Vehicle
- Sets parking brake; shifts into appropriate gear before removing foot from brake
- Turns off appropriate accessories prior to turning off ignition and removing key
- Visually checks traffic flow before opening door
- Locks doors and activates alarm system if the vehicle is equipped with this device